Page 57 - Oil&Gas-AustralAsia-2015-Issue-2
P. 57
S UBSEA
seal capable of withholding up to 15,000 The level of control achieved while Conclusions
psi of pressure for three minutes, with- machining the taper also allows a fitting
out any leakage. The standard ANPT to be made up quickly, without the need The BuTech ANPT spec and machining
thread, by contrast, demonstrated for sealing tape. Low viscosity thread process produce valves and fittings that
maximum and minimum tolerance fail- sealants can be confidently used with- are certified for operation up to 15,000
ures from 8,000 psi to 11,000 psi upon out risk of leaking, thanks to the level of psi, a specification that is unmatched
reaching pressure. (Fig. 2) control designed into the taper. in the industry. Operators will not only
be able to use these valves without fear
MX ASME/ANSI B.120.1 of leakages or blowouts, but they will
.223 NPT have access to BuTech’s valve and fitting
expertise when they have questions
DEPTH OF THREAD FROM Mn BT SAE AS 71051 ANPT BUTECH HPS 10.7 about the dimensional requirements of
1.60 ANPT mating parts for a specific application—
MX regardless of whether these parts were
.123 made by BuTech. With this information
MM resource as their guide, operators can
.0979 ensure that their valves and fittings
meet the strictest operational criteria,
B thus lowering their exposure to a costly
.063 and environmentally damaging leak or
rupture. §
MN
0
3,000 PSI 6,000 PSI 9,000 PSI 12,000 PSI 15,000 PSI Figure 2: Thread Depth and Maximum Pressure
PRESSURE Rating by Thread Standard
At the forefront of high-pressure technology, BuTech valves help
companies safely operate in high-pressure, high-temperature (HPHT)
environments.
Proven and reliable high-pressure valves for intervention and production,
designed to meet the critical requirements of today’s most
severe applications.
BuTech products are in their element under extreme HPHT conditions in
any application, including erosive or corrosive solids, liquids or gases.
Rigid quality control procedures guide all of our manufacturing and
assembly processes, including the application of non-destructive
testing to ensure rigid specification compliance.
www.butech-valve.com
www.oilandgasaustralasia.com A AMAY/JUNE 2015 OIL & GAS ustral SIA 55
seal capable of withholding up to 15,000 The level of control achieved while Conclusions
psi of pressure for three minutes, with- machining the taper also allows a fitting
out any leakage. The standard ANPT to be made up quickly, without the need The BuTech ANPT spec and machining
thread, by contrast, demonstrated for sealing tape. Low viscosity thread process produce valves and fittings that
maximum and minimum tolerance fail- sealants can be confidently used with- are certified for operation up to 15,000
ures from 8,000 psi to 11,000 psi upon out risk of leaking, thanks to the level of psi, a specification that is unmatched
reaching pressure. (Fig. 2) control designed into the taper. in the industry. Operators will not only
be able to use these valves without fear
MX ASME/ANSI B.120.1 of leakages or blowouts, but they will
.223 NPT have access to BuTech’s valve and fitting
expertise when they have questions
DEPTH OF THREAD FROM Mn BT SAE AS 71051 ANPT BUTECH HPS 10.7 about the dimensional requirements of
1.60 ANPT mating parts for a specific application—
MX regardless of whether these parts were
.123 made by BuTech. With this information
MM resource as their guide, operators can
.0979 ensure that their valves and fittings
meet the strictest operational criteria,
B thus lowering their exposure to a costly
.063 and environmentally damaging leak or
rupture. §
MN
0
3,000 PSI 6,000 PSI 9,000 PSI 12,000 PSI 15,000 PSI Figure 2: Thread Depth and Maximum Pressure
PRESSURE Rating by Thread Standard
At the forefront of high-pressure technology, BuTech valves help
companies safely operate in high-pressure, high-temperature (HPHT)
environments.
Proven and reliable high-pressure valves for intervention and production,
designed to meet the critical requirements of today’s most
severe applications.
BuTech products are in their element under extreme HPHT conditions in
any application, including erosive or corrosive solids, liquids or gases.
Rigid quality control procedures guide all of our manufacturing and
assembly processes, including the application of non-destructive
testing to ensure rigid specification compliance.
www.butech-valve.com
www.oilandgasaustralasia.com A AMAY/JUNE 2015 OIL & GAS ustral SIA 55
